Effect of ZnO layer thickness upon optoelectrical properties of NiO/ ZnO heterojunction prepared at room temperature

In this work, p-NiO/n-ZnO heterostructures were successfully prepared at room temperature using RF sputtering technique. The influence of ZnO layer thickness on the performance of the heterojunction was investigated. The deposited ZnO layers have a hexagonal Wurtzite structure with preferable growth orientations along (002) and (103) for thinner films. Increasing the thickness results in more crystallographic orientation randomness. The current–voltage measurements of the realized heterojunctions showed a clear rectifying behavior. The measured ideality factor varies from 2.5 to 1.6 according to the thickness of ZnO layer. The series resistance of the device is enlarged with increasing ZnO thickness. The deduced parameters from the I–V characteristics suggest that 200 nm is the optimal thickness of the ZnO layer according to our experimental conditions. We attribute the relatively better performance of this thickness to achieving reasonable compensation between serial resistance and ideality factor. The best heterojunction was tested and successfully used as a UV detector.     

Cross-Layer Optimization of Dynamic Packet Assignment for Video Transmission Over IEEE 802.11e Networks

Video transmission over IEEE 802.11e wireless networks still shows poor performance for large bandwidth demand and frequently changed environments. Thus, several enhancements of IEEE 802.11e were proposed. On the other hand, big frames and simultaneous sending of adjacent frames always cause packet dropping for buffer overflow. In the past, we proposed an IEEE 802.11e enhancement named DFAA and a content aware mechanism to solve the above problems. The motivation of this paper is to find a proper way to integrate these two mechanisms. A DFAA enhancement (DFAA-E) is proposed to make up the insufficiency of content aware mechanism. Experiments results show that the combination of DFAA-E and content aware mechanism improves the video decoded quality greatly. And its performance can be further enhanced by selecting the suitable settings of certain parameters.     

掘进巷道快速过断层施工技术应用

基于四候煤矿3108回风顺槽过F3断层期间,顶板出现严重破碎、下沉现象,提出了俯斜台阶法施工工艺,并对断层破碎带顶板采取MF-2型化学材料注浆加固以及"钢筋锚索网+U29梯形棚"联合支护措施。支护效果检验结果表明,联合支护有效控制了断层破碎区顶板下沉、破碎现象,保证了巷道顶板稳定性。     

Reoptimization framework and policy analysis for maritime inventory routing under uncertainty

We study a maritime inventory routing problem, in which shipments between production and consumption nodes are carried out by a fleet of vessels. The vessels have specific capacities and can be chartered under different agreements. The inventory levels of all consumption nodes and some production nodes should be maintained within specified bounds; for the remaining production nodes, orders should be picked up within pre-defined time windows. We propose a discrete-time mixed-integer programming model. In the face of new information and uncertainty, this optimization model has to be re-solved, as the horizon is rolled forward. We discuss how to account for different sources of uncertainty. We present a rolling-horizon reoptimization framework that allows us to study different policies that impact the quality of the implemented solution, so we can identify the optimal set of policies.     

Comparative studies on thermal and toughness properties of polybenzoxazine composites with two functionalized graphene oxides

Abstract

Graphene oxide (GO) was functionalized by polyether amine (PEA) via two methods which were one-pot modification in acetone (GON) and two steps with the intermediate product of GOCO-Cl generated (GONS). There were more PEA successfully grafted onto GO for GONS than GON. The onset polymerization temperatures of the benzoxazine (Bz) composites decreased by the inclusion of 1?wt% of GO, GON or GONS. Thermal stability of the polybenzoxazine (PBz) composites was significantly improved indicated from the increase of weight loss temperature. T₁₀, T₂₀ and T₅₀ values of the composites with GONS were higher than that of the others. Toughness of PBzs may be enhanced by the incorporation of nanofillers, and GONS had stronger interfacial interaction with PBz matrix than GON.     

The origin of the modulated structure in Sr2CuO3+δ (δ = 0.4): [CuO2] in-plane oxygen vacancy or apical oxygen vacancy?

We propose the question of the modulated structures of copper oxide is caused by the [CuO₂] in-plane oxygen vacancy or apical oxygen vacancy. Sr₂CuO_3+δ single-crystal samples were prepared using high-temperature and high-pressure methods. The major phase of Sr₂CuO_3+δ (δ = 0.4) single-crystal system is found to be constituted by the 5 a modulated structure with the Fmmm space group, which originates from the [CuO₂] in-plane oxygen vacancy appearing in octahedral Cu-O. Besides, the presence of the [CuO₂] in-plane oxygen vacancy may obliterate the superconductivity of the system. Experimental results deduce that the oxygen vacancy may appear in the apical oxygen sites in high-temperature copper oxide superconductors.     

A dynamic SVR–ARMA model with improved fruit fly algorithm for the nonlinear fiber stretching process

Natural Computing - The fiber stretching process plays the key role in the process of fiber production and its effects is measured by the stretching ratio. The stretching ratio is determined by the...     

High molecular weight poly(butylene terephthalate-co-butylene 2,5-furan dicarboxylate) copolyesters: From synthesis to thermomechanical and barrier properties

Poly(butylene terephthalate-co-butylene 2,5-furandicarboxylate) copolyesters (PBTFs) were synthesized from 1,4-butanediol, dimethyl terephthalate (DMT), and 2,5-furandicarboxylic acid (FDCA) by a two-step polymerization method. Their chemical structures were confirmed by Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and carbon nuclear magnetic resonance before thermal properties were explored with differential scanning calorimeter and thermogravimetric analyzer. Results showed that PBTFs changed from semi-crystalline to completely amorphous when the content of FDCA unit was increased to 45 mol% at first, and then became crystallographic again with the further increment of FDCA unit to 75 mol%. For their mechanical properties, the tensile modulus and strength showed the similar trend, decreasing firstly and then increasing later. Their barrier to carbon dioxide and oxygen became better with the increasing of furan content due to the rigidity and higher polarity of furan ring. The performance of PBTFs copolyesters was investigated clearly, and the relative content of FDCA and DMT can be adjusted to satisfy different performance requirements.     

北京冬奥会推动国内制冷行业可持续发展

二氧化碳制冷技术和提升氨制冷安全体系是绿色制冷的重要支撑,北京冬奥会大量采用绿色制冷技术,不仅推动国内制冷行业可持续发展,而且将对2030年碳达峰和2060年碳中和产生深远影响.     

有关工程建设管理现状的一些思考

为了促进我国工程建设管理由粗放式向科学化、规范化管理的转变,国家针对影响工程建设管理的几个关键环节,提出了“四制”:为了明确管理主体责任,实行了项目法人负责制;为了引进市场竞争机制,实行了招标投标制;为了实现工程质量全面专业化管理,实行了建设监理制;为了规范工程建